P.64 Power AST Hybrid Polymer
AST polymer-based, one component, hybrid joint-filling sealant with very high built-up of strength. It does not contain solvent or isocyanate and can be applied for multi purposes can be applied as a multi purpose adhesive and sealant.
- Very high final strength
- Waterproof; becomes elastic and soft with air humidity
- Free from solvent and odorless
- One Component
- No bubble formation
- No shrinkage
- Does not need primer (preliminary test recommended)
- Excellent elasticity and very good adhesion strength
- Does not contain solvent, silicone or isocyanate
- Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.
- Before the application, the tip of the cartridges is cut and a plastic cap is fixed.
- The tip of the cap is cut according to the width of the surface and fixed to the cartridge gun.
- The sausage package is cut from one edge and fixed to a suitable gun.
- Then the cap nut is screwed to the cylinder of the gun.
- The joints should be filled at one time and without gaps during the application.